Topcom ORBIT - Manual (Page 32)

32
Additional handsets and base stations
12 Additional handsets and base stations
You can subscribe up to 5 handsets on a base. Each handset can register up to 4 base
stations and the user can select the base he wants to use.
12.1 Adding a new handset
To put the base into registration mode:
On the handset:
12.2 Removing a handset
This procedure needs to be carried out on a different handset then the one you want to
remove.
12.3 Select a base
You can switch your handset between bases. The handset must first be registered with
each base individually.
Only needed when you have deregistered a handset or when you bought a
new one.
1 Press and hold the paging key on the base for 3 seconds.
During 60 seconds the base is ready to register.
1 If the handset is new “Please Register” is shown. Press “Menu” and
select “Registration”.
OR
2 Enter the menu.
3 Select “Registration”.
4 Select “Register handset”.
5 Select the number of the base to be associated with the handset
(1-4) and confirm.
6 Enter the system PIN (0000 by default) and confirm.
7 Return to standby.
1 Enter the menu.
2 Select “Registration”.
3 Select “De-Register”.
4 Enter the system PIN (0000 by default) and confirm.
5 Scroll to the handset that needs to be removed and confirm.
6 Press “Yes” to confirm or “No” to cancel.
7 Return to standby.
1 Enter the menu.
2 Select “Registration”.
3 Select “Select Base”.
4 Scroll to the base you want to use and confirm. The base currently
in-use is marked with “In-use”.