Topcom ORBIT - Manual (Page 11)

English
11
Using the telephone
3.3 Setting the date and time
3.4 Setting the time format
3.5 Making a normal telephone call
Direct dialling
Pre-dialling
With the pre-dialling feature, you can enter and modify a number before making the call.
- The date and time is kept inside the base and send to all handsets, so you
only have to set the date/time ones when using more then one handset.
- The date/time can be set by the Caller ID (Clip) information, or manually
as mentioned below.
1 Enter the menu.
2 Select “Clock & Alarm” and confirm.
3 Select “Date & Time” and confirm.
4 Enter day, month, year, time and minutes and select “Save” to
confirm.
5 Press “Back” to go to the previous menu.
The time format can be set differently for each handset.
1 Enter the menu.
2 Select “Clock & Alarm” and confirm.
3 Select “Time Format” and confirm.
4 Select “12 Hour” or “24 Hour” and confirm.
5 Press “Back” to go to the previous menu.
1 Press the off-hook key to start the call.
2 Dial the telephone number.
3 Press the on-hook key to hang up or put the handset back on the
base.
1 Dial a number of up to 32 digits.
Press and hold the Pause-key to insert a pause. The screen displays a
“P”.
2 Press the soft menu key “Clear” to correct.
3 Press the off-hook key to start the call or select “Options”.
4 If you selected “Options”, scroll and select:
“Save”: to store the number into the phonebook;
“Send Message”: to send a message.
5 Press the on-hook key to hang up or put the handset back on the
base.