Transition Networks STACKMASTER TR SMHB-TR-16 - Manual (Page 29)

3 3.. IIN NSST TA ALLLLA AT TIIO ON N
3-11 USER’S GUIDE
SNMP Parameters
To set the SNMP parameter values:
1. To access the SNMP Parameters Menu, at the Network
Parameters MAIN> prompt, type and enter:
MAIN> snmp
The StackMaster™TR 16-Port SNMP Parameters Menu comes up to
provide guidance in setting parameters for data to be used by the external
SNMP network management software:
2. Referring to the Site Configuration Data Sheet, type and enter
modified configuration values in the format:
SNMP> =
3. Verify the modified configuration values by bringing up the same
menu:
MENU> snmp
The menu is redisplayed with the modified values.
3. Save the configuration values by typing and entering the
following
SNMP> save
SNMP> restart
SNMP> quit
The StackMaster™TR 16-Port restarts and the parameter values entered
are written to non-volatile memory.
SNMP Parameters Menu
commwrite = PRIVATE commread = PUBLIC
auth = DISABLE trap = 0.0.0.0
sysname = NONE contact = NONE
location = NONE
SNMP >
Select a parameter [main ==> root menu OR ? ==> help]