TAG CENTRIX SV-2000-X2 - Manual (Page 42)

Operations Manual
SV-2000-X2 Server (CENTRIX / JHSV)
Part Number: 1008080 Page 42 of 82
Version 1.4. 01/12/2010
Size - Determines the capacity of the drive CHS
values:
• Number
of Cylinders
• Number
of Heads
• Number
of Sectors
• LBA (Large Block Addressing)-technology to
overcome the 528 MB limit
6.7.1.5 Boot Sector Virus
A common setting related to hard drives. When
enabled, the BIOS issues a warning
message/beep if an attempt is made to write to
the boot sector or partition table of a hard disk.
6.7.1.6 Memory
Parity adds an extra bit (odd or even) to the 8-
bit data-string to ensure data integrity in
memory modules. Its successor, ECC,
provides improved data integrity by adding
information about individual bits.
6.7.1.7 Boot Sequence
This setting is used to control the order that the
BIOS uses during the boot process to look for
a boot device from which to load the operating
system. For example:
• CD
• Floppy
• Hard
Disk
6.7.1.8 Date and Time
The Date and Time is set in the BIOS, stored in
CMOS, and maintained by CMOS battery.
6.7.1.9 Passwords
In most cases a user (startup) password and a
supervisor (setup) password can be set in the
CMOS. When a Setup password is required,