Toshiba 26DF56 - Manual (Page 13)

13
Appendix
Using the
TV’
s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to T
oshiba
Important
Safeguards
Connecting
your TV
You will need:
• one coaxial digital cable
• Six sets of speaker cables
Digital Audio
Coaxial
IN
AV Amplifier with built-in digital surround
Center Speaker
Front
Speaker
(Left)
Front
Speaker
(Right) Subwoofer
Surround Speaker
(Left) Surround
Speaker (Right)
TV
TV
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver’s inputs.
Consult the owner’s manual for your receiver to determine the best way to switch between the analog and digital signals.
Connecting an audio system
This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
See “Selecting the digital output format” on page 34”.
Connecting an A/V amplifier with built-in digital surround
You will need:
• one set of standard audio cables
LINE IN
L R
Back panel of TV
Amplifier
Note:
For additional information, please refer to your
amplifier owner’s manual.
3Y90121A(E)_P07-13 4/6/06, 3:12 PM 13