Making a backup, 90 making a backup – Toshiba e405 User Manual
Page 90
Toshiba Pocket PC e400/e405 User’s Guide
90
Making a Backup
Before performing the backup or restore operations, do the following;
•
Check that there is enough space in the main unit’s memory and on
the storage device. If the storage device does not have enough free
space, you cannot save the backup data. The backup data is saved as
a file named backup.dat on your storage device.
•
Make sure the main unit’s power is off when loading and unloading the
SD card.
•
Save current data in the main unit’s memory before backing it up on
the storage device.
1.
To make a backup to the SD card, insert a SD Card. Make sure to do
so in the proper direction.
2.
Tap Start, Programs, and then DataBackup to display the DataBackup
screen shown below.
1.
Data such as the password in Settings cannot be
restored.
2.
The data stored in the Flash ROM disk cannot be
backed up.
3.
Before backing up or restoring data, stop other appli-
cations, and connect the AC adapter to the Toshiba
Pocket PC e400/e405.
4.
If you make a backup to the SD card or Flash ROM
Disk using the DataBackup Utility, please DO NOT
remove the SD card, reset the device, and/or turn off
the device’s power until the backup is completed.
5.
If you restore the data from the SD card or Flash
ROM Disk by DataBackup Utility, please DO NOT
remove the SD card, reset the device, and/or turn off
the device’s power until the restore is completed.
Failure to follow any of the above procedures may result
in the loss of data.