TRENDnet TEW-631BRP - Manual (Page 71)

71
PPPoE, PPTP, L2TP Connection
Depending on whether the WAN connection is currently established, you can click either the
Connect
to attempt to establish the WAN connection or the Disconnect to break the WAN
connection.
BigPond Connection
Depending on whether you are currently logged in to BigPond, you can click either the
BigPond Login
to attempt to establish the WAN connection or the BigPond Logout to break
the WAN connection.
LAN Computers
This area of the screen continually updates to show all DHCP enabled computers and devices
connected to the LAN side of your router. The detection "range" is limited to the address range
as configured in DHCP Server. Computers that have an address outside of this range will not
show. If the DHCP Client (i.e. a computer configured to "Obtain an address automatically")
supplies a Host Name then that will also be shown. Any computer or device that has a static IP
address that lies within the detection "range" may show, however its host name will not.
IGMP Multicast memberships
If IGMP is enabled, this area of the screen shows all multicast groups of which any LAN
devices are members.