TRENDnet TEW-631BRP - Manual (Page 19)

19
Basic_ Network Settings
Use this section to configure the internal network settings of your router. The IP Address that is
configured here is the IP Address that you use to access the Web-based management interface. If you
change the IP Address here, you may need to adjust your PC’s network settings to access the
network again.
WAN Port Mode
This option controls how the device reacts to traffic on the WAN connector. In this case the
Term “port” refers to the Ethernet connectors on the device.
Router Mode
Select this option if the WAN port is connected to the Internet, the device functions as a NAT
router.
Bridge Mode
Select this option if the device is connected to a local network downstream from another router.
In this mode, the device functions as a bridge between the network on its WAN port and the