TechniSat DIGITY 1 User Manual

Page 25

Mark the programmes to be deleted as described above.

Press the

red (Delete) function key.

The query “Really delete program(s)?” will be displayed.

Press the

arrow left/right keys to select Yes or No.

Confirm entry by pressing

OK.

7.1.4 Sorting programmes

In order to sort the programmes in a user programme list in the order most convenient to
you, proceed as follows:
>

Call up a programme list display by pressinf the

OK key.

Use the

green function key to select the programme list you wish to change/sort

(Point 7.1.1).

Press the

blue function key (edit mode).

Use the

arrow up/down keys to mark the programme you wish to place at a diffe-

rent position in the list.

Press the

yellow function key to select the function Sort.

A double arrow will be displayed next to the programme selected.

You can now use either the

arrow up/down keys or the numeric keys to place

the programme at any desired position in the programme list.

Press the

yellow function key. The programme will be stored at the new position.

When you have completed configuring the programme list in this manner according to
your preferences, press the

Back key twice to return to normal operation.

7.1.5 Blocking programme access (Parental control feature)

You have the option of blocking access to any programme. A blocked programme can only
be viewed on the screen once you have entered your personal PIN number, after selecting
the programme. Once this number has been entered, access remains unblocked until the
receiver is switched off again (standby).
In order to block access to a programme, proceed as follows:
>

Call up a programme list by pressing the

OK key.

Use the

green function key to select the programme list in which you wish to block

one or more programmes (Point 7.1.1).

Press the

blue function key (edit mode).

Now use the

arrow up/down keys to mark the programme you wish to block.

Now press the

green function key to select the function Parental control.

The symbol

P18 will appear next to the programme selected.

Repeat this procedure as often as necessary until all programmes you wish to block
have been marked.

When you have completed configuring the programme list according to your preferen-
ce, press the

Back key twice to return to normal operation.

In order to activate the parental control feature, you must still enter your personal PIN
number under the following point

Change PIN Then you must switch on the

parental control feature as described in

Point 5.2 (Basic Settings).

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 25