TechniSat DIGITY 1 User Manual
Page 18
6.6 Going back to previous programme viewed
Press the
Back key on the remote control unit to go back to the previous programme vie-
wed.
>
Press this key again to again go back to the programme viewed before the current
one, i.e. to switch back and forth between two programmes.
6.7 Displaying clock and programme information
This function enables you to view the programme information relating to the programme cur-
rently selected.
>
Press the
blue Tkey in order to display information relating to the currently selected
programme.
The lower half of the screen will now display current time, the name of the programme selec-
ted as well as the title of the current programme, as well as its starting and ending times,
provided this information is broadcast by the station.
>
If it is available, pressing the
blue Multifunction key again will display information for
the following programme.
6.8 Additional programme information
Where available from the broadcaster, you can press the
Programme info key to obtain
additional programme information.
>
Press the
yellow function key to display an additional information window.
Further information on the current programme will be displayed.
>
Pressing the
yellow function key again will show information on the following pro-
gramme.
>
To return to normal viewing, and switch off the display, press the
yellow key yet
again.
6.9 Transponder Information
>
Press the
green function key (Transponder Information) in order to display data rela-
ting to the selected transponder.
6.9.1 Audio-Video Information
>
Press the
green function key (Audio/Video) to display audio and video data relating
to the selected programme.
>
Press the
Back key to return to normal operation.
18
bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 18