TechniSat DIGITY 1 User Manual

Page 21

or
>

Press the

TV/Radio key to return to normal operation.

The receiver will now select the chosen programme at the programmed time, and will, unless
otherwise selected, return to standby mode after the programme has ended.

6.12.2 Manual Programming/Changing timer settings

In addition to the option of programming the timer via the EPG, yoi can also programme the
timer manually. In order to do this, proceed as follows:
>

Select the next programme list, to get to the programme you wish to record (Point
6.2.3.1).

Press the

Menu key to call up the Main Menu.

The

Main Menu.will be displayed.

Mark the line designated

Timer.

Confirm by pressing

OK.

The menu

Main Menu Timer will be displayed.

Press the

yellow function key (New) to go to timer programming, to programme a

new event.

To change an existing timer setting, mark this by means of the

arrow up/down

keys. Press the

yellow function key (Modify) in order to access the settings of the

marked timer.

Proceed as follows with the programming:
Source
>

Use the

arrow keys to mark the column Source, then use the OK key to enter

the desired source (

TV or Radio).

bed_anl_DIGITY 1_englisch_4.qxd 21.06.02 13:41 Seite 21