Toshiba 36A12 - Manual (Page 28)

28
Using the T
V’s
F
eatur
es
Watching picture-in-picture (PIP)
The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The small PIP window can display a signal from a
TV broadcast or an external source, such as a VCR.
To display a TV broadcast in the PIP window:
1. Tune the TV to the program you want to watch in the main
window.
2. Press PIP to display a small picture (one press displays a PIP
window 1/9 the size of the screen; two presses display a 1/16-size
window).
7
1/9
PIP
1/16
3. Press PIP CH yz to change the PIP channel. Press Channel yz
to change the main channel.
To display an external source in the PIP window:
1. Connect the external equipment to the ANT-1 connection on
the TV.
Note: An ANT-2 source will not display as a PIP. For connection
information, see “Connecting your TV” on page 7.
2. Turn on the TV and select the program/source you want to watch
in the main window.
3. Press PIP (one press to display a PIP window 1/9 the size of the
screen; two presses to display a 1/16-size window).
4. Press SOURCE to select the PIP input source (TV, VIDEO 1,
VIDEO 2, or VIDEO 3). The current source will display
on-screen in green.
TO SELECT PUSH SOURCE
PIP
TV
VIDEO1
VIDEO2
VIDEO3
To turn PIP off:
Press PIP two or three times, depending on the PIP window size
you selected.
Switching the main and small pictures
With the TV in PIP mode, repeatedly press SWAP to switch the
main and small pictures back and forth.
Note:
The PIP window will not open when a
ColorStream (component video) source is
being viewed.
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL POWER
TV
CABLE
VCR
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7 8 9
0 100
SWAP
CH CH (Channel)
VOL
PIP CH
CT-9946
SOURCE
PIP