Toshiba 36A12 - Manual (Page 18)

18
Setting up
y
our T
V
Adding and erasing channels manually
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS
to select the channel.
2. Press MENU.
3. Press
x or • to highlight the SET UP menu.
4. Press y or z to highlight ADD/ERASE.
MOVE SELECT [ ] [ ]
LANGUAGE:
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH] FRANCAIS ESPANOL
[ANT1] ANT2
[TV] CABLE
[ADD] ERASE
SET UP
5. Press x or • to highlight ADD or ERASE, whichever function
you want to perform.
6. Press MENU.
7. Repeat steps 1–6 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL y z .
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (0–9 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
MENU y z x •
CHANNEL y z
MENU TV / VIDEO VOLUME CHANNEL POWER
CH RTN
ADV/
PIP CH
ADV/
PIP CH
LIGHT
MUTE TV/VIDEO TIMER
RECALL POWER
TV
CABLE
VCR
ENT
ENTER FAV FAV
C.CAPT
EXIT
MENU
RESET
1
4
2
5
3
6
7 8 9
0 100
Channel
Numbers
MENU
CH CH (Channel)
VOL
EXIT