Toshiba FT-8001 AW - Manual (Page 16)

15
Replacing a telephone number
Just store the new number following the same steps in “1. STORING
NUMBERS.”
The new number will replace the previously stored one.
2. DIALING A STORED NUMBER
q Pick up the handset and press
TALK .
The TALK/BATT LOW LED lights.
w Press
MEM .
e Enter the memory address (0 to 9).
The stored number will be dialed.
Note
If you enter a memory address which does not have any stored number, error beeps sound.
3. INSERTING A PAUSE IN MEMORY
Use RDL/P (redial/pause) to make an outgoing call through a PBX or
long distance. Each time you press RDL/P , a pause of about two seconds
is inserted during the dialing sequence. If more than two seconds is
needed, press
RDL/P twice.
EXAMPLE: To store “0 PAUSE 1234567890” in memory address 4,
press:
MEM 0 RDL/P 1 2 3 4 5 6 7 8 9 WX 0 MEM 4
4. CHAIN DIALING
Combining ordinary dialing and memory dialing, you can dial a long
telephone number with less steps.
EXAMPLE: Divide the number into two portions and store the first portion
in memory address 1 and the second portion in memory address 2.
When you call, press the following buttons;
TALK MEM 1 MEM
2