Toshiba FT-8001 AW - Manual (Page 15)

14
MEMORY DIALING
You can store up to 10 telephone numbers in memory.
Notes
In memory dialing operation,
• If more than 20 seconds elapse between pressing buttons, the operation will be cancelled and
you must start over again.
• If you press a wrong button, an error tone sounds and the handset returns to standby mode.
• If a call comes in, the operation will be cancelled and you will hear the ring.
1. STORING NUMBERS
You can store up to 16 digits including #, and PAUSE in one memory
address.
q Pick up the handset from the base unit. (Do not press
TALK ).
w Press
MEM
.
e Dial the telephone number you wish to store (up to 16 digits).
r Press
MEM .
t Enter the memory address (0 to 9) at which you wish to store the
phone number dialed in step 3.
You will hear a confirmation tone when the number is successfully
stored.
To store more telephone numbers, repeat steps w to t.
y Return the handset to the base unit or press
MEM
.
u Record the telephone numbers on the SPEED DIAL INDEX CARD,
and place it on the back of the handset.
EXAMPLE: To store 9012345 in memory address 3
MEM 9 WX 0 1 2 3 4 5 MEM 3