Toshiba DKA-UG-DKSLT-VB - Manual (Page 35)

Features
CO Line Queuing
26
Strata DK Digital Single Line Telephone 5/99
CO Line Queuing
If all outgoing CO lines are busy, the CO Line Queuing feature will ring your
telephone when one is available.
...or for Tandem calls:
press
&QI7UQ and
hang up.
If only your telephone is connected with two parties on
external CO lines, you can exit the call to allow the
two external parties to continue talking.
If you exit the conference call, the Line LED continues to flash.
Your station appears busy to other callers.
1. If you hear busy tone
after dialing a CO line
access code, press
.
Busy tone stops, followed by dial tone (two secs.), then busy tone
resumes.
2. Hang up. (You can
make other calls
while waiting for a
line to become
available.)
3. Your telephone rings
at a fast rate when a
CO line becomes idle.
4. Answer within three
rings to prevent the
callback from being
cancelled.
You hear CO dial tone. (If you hear busy tone, it means the line has
already been seized or has received an incoming call. Your request
is not cancelled. You will be called again the next time a line
becomes idle.)
5. Dial the desired
telephone number.
If the original call was made using LCR (dial ), the system
automatically dials the number.