Technicolor - Thomson DTH8000 - Manual (Page 50)

Menus
50
System Options Menu
The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DTH 8000 to match those of the devices
connected to it.
1. From the main menu select the Setup line with the keys, then confirm with OK .
2. Select Options system with the keys, then confirm with OK .
3. Select a function with the keys, confirm with OK , adjust and confirm with the keys
and OK .
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DTH 8000, you will need to set the
DIGITAL
AUDIO OUT sockets (coaxial or optical) so that they deliver the Dolby
Digital, DTS or MPEG digital signals supported by the other device.Tick
Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or DTS
decoder (or both, depending on devices). MPEG must be ticked to play a
DVD disc on which the sound was recorded using MPEG standard.
SRS - TruSurround
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated.
Note : is a trademark of SRS Labs, Inc. TruSurround ® technology is
incorporated under license agreement from SRS Labs, Inc.
DTH8000_en(EB-UB) 18/12/03 14:49 Page 50