Technicolor - Thomson DTH8000 - Manual (Page 21)

21
Recording functions
EN EN
To watch TV Programmes
1. Turn on your television set.
2. Turn on your DTH 8000 using the STANDBY/ON key.The time displayed on your DTH
8000 is replaced by the word MENU .
• After a few seconds the main menu of the player appears on the television screen.
• Watch TV function is already selected.
Note: turn off non used devices to avoid problems of selecting
sockets or other types.
If the main menu of the player is not displayed on the television
screen, check and/or select the Scart socket to which you
connected your DTH 8000 (see page 3 - AV1 selection).
Generally the selection is carried out using the AV key on the
television set remote control.
If the THOMSON logo temporarily appears, it is because the
screen saver has been triggered ; press the
OK button to
display the menu..
3. Press the OK key of the remote control or one of the PR+/PR- , keys on the front panel.
• The images of the last watched channel appear.
• Encrusted within the image is information on the channel and programme.This disappears
after several seconds.
Note: when the information banner is displayed at the top of
the screen you have the possibility of choosing an audio channel
(if this is provided by the channel) using the
key on the
remote control.
To display information again, press the INFO key of the remote
control.
4. Change the channel with the PR+/PR- key or the remote control number keys.To select a
channel on a device connected to your DTH 8000 use the AV key of the remote control or
press PR+/PR- several times.
DTH8000_en(EB-UB) 18/12/03 14:48 Page 21