Technicolor - Thomson DTH8000 - Manual (Page 36)

Playing a disc
36
To access the information banner, press INFO on your remote
control unit during playback. Use arrow keys and on the
remote control unit to select the various icons.When an icon is
selected it is highlighted.The line under the banner is an
information and instruction line.When small arrows appear
above and below the selected icon these point to other
possible options. Now use the
and keys to scroll
through the various options.
Timer (DVD,VCD, CD)
This icon shows the time elapsed since the start of playback.The time
displayed is that of the title of a DVD disc during playback.The timer provides
direct access to a scene or a musical passage by keying in the starting time.
Select the time elapsed icon and use the numbered keys on the remote
control unit to access the place from which you want to play back. Use
two digits for each field. For instance, if you enter 01:35:12, you will
access the sequence beginning 1 hour, 35 minutes and 12 seconds after
the start of the title.
Note: for audio VCDs, the timer refers to the track currently being played.
Title or Track (DVD,VCD, CD)
Most DVD discs only contain one title. However some discs may contain
several titles each of which is itself divided into several chapters.
To choose a title, select icon T then use the or keys to scroll the
titles or tracks. Use the numbered keys on the remote control unit to
access a particular title or track.
Chapter (DVD)
Most DVD discs contain several chapters.
To choose a chapter, select icon C then use the or keys to scroll
chapters. Use the numbered keys on the remote control unit to access a
particular chapter.
Note: follow your progress below the banner.
Play modes of discs (DVD - VCD)
The DTH 8000 has several play modes that depend on the type of disc being
played: standard play respects the order of the titles and chapters on the disc;
repeat between 2 points or repeat a disc, a title.The icon of the play mode is
accessible via the information banner during playback.
During playing of a disc, press the INFO key (the information banner is
displayed). Use the / and / keys.The icon changes depending on
the mode selected as well as the text area in the information banner:
Standard, Repeat title, Repeat A-B, Repeat disc.
Note: the standard play mode is activated every time a new disc is placed in the
DTH 8000.
INFO
Arrow
right
Arrow
up
Arrow
left
Arrow
down
OK
The disc information banner
Play modes
DTH8000_en(EB-UB) 18/12/03 14:48 Page 36