Timex Ironman Sleek 509-095000-02 NA - Manual (Page 18)

31
E
4. Press MODE (NEXT) to advance to the next setting option.
5. Press START/SPLIT (+) or STOP/RESET (-) to select STOP AT END or
REPEAT AT END.
6. Press SET (DONE) to finish the setting process.
Using the Timer
1. Tap the watch lens, or press START/SPLIT to start Timer.
2. A timer melody chime will sound when the Timer reaches zero and
stops and repeats. The melody can be turned off with the press of any
button.
3. If you need stop or pause the timer, tap the watch lens or press
STOP/RESET.
4. When finished, press and hold STOP/RESET to reset the Timer to the
original time. If you Press and hold STOP/RESET a second time you will
clear the timer to 0.
• If workouts are locked and the memory has fewer than 30 laps avail-
able, the watch will signal that memory is becoming full by displaying
“x laps free”. Once no memory is available the watch will display
“memory full" and it will be necessary to unlock saved workouts to free
up the space for the next workout to be recalled.
TIMER
The Timer is used to countdown a fixed event time. The timer can be set
to repeat and countdown continuously, or to stop at the end of the count-
down. You can use the TapScreen
™ Technology to activate and stop the
timer at any time.
Setting the Timer
1. Press MODE until TIMER appears.
2. Press SET to begin setting the timer.
3. Press START/SPLIT (+) or STOP/RESET (-) to increase/decrease the
countdown timer values.
30
W254_TAP_Booklet_EN_Layout 1 9/18/09 1:59 PM Page 30