Perreaux 6160/P - Manual (Page 37)

36
14 14 14 14
Specifications
The 6160 specifications are detailed in brief and then subsequently in more
detail. In the detailed version, we attempt to explain the significance of each
specification.
The correlation between published specifications and sonic quality can be
unreliable. A list of numbers reveals virtually nothing. All technical
measurements must be subject to qualitative as well as quantitative
interpretation. Measurements of the 6160 reveal excellent results by any
standards. Tested at 115V and 230V after a 10 minute warm up period.
Specifications
In Brief
Rated Power Output: ..................................................................160W
RMS
into 8Ω
(continuous, per channel, driven from 20Hz-20kHz at < 0.04% THD)
.................................................................................................225W
RMS
into 4Ω
(continuous, per channel, driven from 20Hz-20kHz at < 0.07% THD)
Bridged .......................................................................................425W
RMS
into 8Ω
(continuous, driven from 20Hz-20kHz at < 0.07% THD)
Frequency Response:......................................................... 5Hz – 40kHz, ±0.25dB
Total Harmonic Distortion
(THD+N)
Typically:.....................................................................0.005%, @ 1kHz into 8Ω
20Hz to 20kHz: .......................................................................<0.040%, into 8Ω
Voltage Gain:............................................................................................... 27.6dB
Dynamic Headroom
(rated with music)
:.............................................................>1.5dB
Voltage Swing: ........................................................................................... 160V
p-p
Maximum Current Output: ........................................................... 24A per channel
Damping Factor: .................................................................>500, @ 1kHz into 8Ω
Signal to Noise Ratio
Rated Output
(unweighted)
:.............................................................................. 95dB
Input Sensitivity: ....................................................................................... 1.3V
RMS
Input Impedance: ............................................................................................36kΩ
Smoothing Capacitance: .......................................................................... 60,000μF
Driver Stage:............................................................................................... Class A
Output Stage: ....................................................................................... Class A/AB
Audio Inputs: .......................................................................... 6 x RCA connectors
Audio Outputs: .....................................................6 pairs of speaker binding posts
Other Connections
1 x IEC AC mains input receptacle
1 x 3.5mm “mini” jack for master remote input (5 – 12V DC)
1 x 3.5mm “mini” jack for slave remote output (12V DC)
Power Consumption
Idle .................................................................................................................100W
Maximum ....................................................................................................1600W
(at 4Ω rated output)