Perreaux 6160/P - Manual (Page 17)

16
Input Sockets
Accepts a standard single-ended input (RCA) from a preamplifier/processor with
single-ended outputs. These high quality gold plated sockets are highly
conductive, corrosion resistant, and provide less potential for corrosion induced
distortion. All inputs are clearly marked channel 1 through 6.
By associating the channel inputs as pairs, the 6160 can be configured as three
160W stereo power amplifiers. Care should be taken to maintain channel
integrity.
Refer to Chapter 14 “Specifications”, for detail on input sensitivity and
impedance.
Bridging Switch
The bridging switch allows the combining of two channels together to form a
single higher output channel. When in NORMAL mode, the individual inputs
correspond directly to the respective loudspeaker outputs. When in BRIDGED
mode, the input channel is the odd numbered channel of the bridged pair, and
loudspeaker outputs correspond to the 'positive terminals' of the bridged pair.
Bridged channels offer considerably more power than two channels individually.
For more information on channel bridging, please refer to Chapter 5 “Bridging
Channels”.
Caution! ALWAYS disconnect the unit from the mains power before any
modifications to inputs, outputs, and bridging switches are performed.