Perreaux 6160/P - Manual (Page 14)

13
4 4 4 4
Rear Panel Functions
Caution! Please make all changes at minimum volume setting. Only increase the
volume after the connections have been made.
AC Mains Input
An IEC-standard mains input is provided at the rear of the unit. The AC cord set
is removable, allowing you to upgrade to a cord set of your preference.
Caution! Prior to connection to the AC mains, please check the voltage label on
the rear panel to ensure that your unit conforms to the power supply in
your area. Never attempt to connect the unit to the incorrect voltage.
Severe damage can result from applying incorrect voltage to the unit.
Speaker Output Terminals
The 6160 is equipped with one pair of output terminals per channel. All
terminals are clearly marked and colour coded RED Positive (+) and BLACK
Negative (-). This polarity must be observed when connecting loudspeakers, i.e.
positive terminal of the 6160 to the positive terminal of the loudspeaker and
negative terminal of the 6160 to the negative terminal of the loudspeaker.
When bridging two channels, the positive loudspeaker terminals of the bridged
pair form the loudspeaker terminals for the bridged channel, i.e. the positive
terminal of the odd numbered channel becomes the POSITIVE terminal of the
bridged pair; the positive terminal of the second channel becomes the
NEGATIVE terminal of the bridged pair (refer labeling on Rear Panel).