Perreaux 6160/P User Manual
Page 19
18
Caution! When in bridged mode, loudspeaker cables must be connected directly
from the amplifier to the loudspeakers. DO NOT connect to a speaker
switch, headphone adapter, or any other device that shares a common
ground between channels
.
àConnect the signal lead from the desired source to the bridged input. In
this instance, the bridged input for channels 5&6 is input 5.
Note: Do not connect anything to input 6.
Input 1 and input 3 are to be used if bridging other channels.
àReconnect the mains power supply to your 6160, and turn the power
switch ON.
Note: When in bridged mode, we recommend that the loudspeakers have a
nominal impedance no less than 8Ω.
See also other documents in the category Perreaux Receivers and Amplifiers:
- SXV2 (2 pages)
- E1 (2 pages)
- Passive Preamplifier Silhouette SXP2 (23 pages)
- 3400 (2 pages)
- SM6/P (35 pages)
- NR500 (2 pages)
- SXP2 (24 pages)
- PMF1150B (2 pages)
- 4004 (1 page)
- Prisma 350 (38 pages)
- PMF2000 (2 pages)
- R200i (7 pages)
- PMF3350 (1 page)
- E100V (2 pages)
- 653-093 (2 pages)
- SM3 (2 pages)
- SX25 (27 pages)
- 5570 (2 pages)
- PMF1550 (2 pages)
- SX60m (28 pages)
- SX25i (27 pages)
- PMF1070 (2 pages)
- 750 (38 pages)
- 25W Integrated Amplifier SX25i (26 pages)
- SA3 (2 pages)
- SP100 (2 pages)
- PMF4000A (2 pages)
- SXH2 (27 pages)
- SM6 MKII (37 pages)
- SA80B (2 pages)
- 3000B (2 pages)
- PMF4000 (2 pages)
- SA33 (2 pages)
- MC6100 (2 pages)
- SM2 (2 pages)
- E2200 (2 pages)
- 200 (7 pages)
- SM4 (2 pages)
- PMF5550 (2 pages)
- E110 (2 pages)
- SP10 (2 pages)
- EP3 (2 pages)
- E220 (2 pages)
- E160 (38 pages)
- SP100II (1 page)