Toshiba GD-1210 - Manual (Page 9)

Features of the GD-1210 7
Features of the GD-1210
y Super G3 High-Speed Communication
High-speed communication in the Super G3 mode is enabled.
* “Super G3 Fax” is an appellation of Fax machines with a modem compatible with ITU-T V.34, which
is a new high-speed modem standard.
y JBIG Encoding System
This device uses a JBIG encoding system compatible with standard recommendations of
ITU-T T.85.
y Mailbox Communication
This equipment is compatible with mailbox communications (e.g. confidential communica-
tion, bulletin board communication, multi-address relay mail communication).
y Plain Paper Recording
Plain paper is used as the Fax output paper. This means that Faxes output from the digital
copier can be stored as business documents. You can also write on and sign them.
y Address Book for 1000 Destinations
Destinations can be numbered from 001 to 1000 for the address book.
y Dual Access
The following operations are enabled using the memory function:
- Reserving a memory transmission during another memory transmission
- Reserving a memory transmission during a reception
- Copying during a memory transmission
- Receiving data while copying
- Receiving data while printing other received data
- Receiving data while printing a list
- Transmitting data in the memory during printing a report
y High-Resolution (U-FINE) Mode
Detailed technical drawings, fine text and photographs can be clearly reproduced in transmit-
ted documents with a resolution of 16 dots/mm X 15.4 lines/mm.
y Multi-Address Transmission
This function enables you to transmit a single document to maximum 400 destinations in one
operation by a direct dialing (using digital keys), or by specifying desired destinations in the
address book (either an individual destination or a registered group of destinations). The
Internet Fax can be used in combination with this multi-address transmission.
y A3-Size Data Transmission and Recording
A3/LD originals such as technical drawings can be transmitted without changing their size.
The received data is printed out at the receiver’s Fax machine in A3/LD size (if available).
y 2-Sided Transmission
The data of a 2-sided original can be transmitted in the exact page order of the original by
scanning the data with the Reversing Automatic Document Feeder (optional).
y 2-Sided Printing
You can reduce paper waste by printing received data on both sides of the recording paper.
y 2-Line Communication
Simultaneous communications in 2 lines, such as simultaneous transmission and reception,
are enabled with the 2nd Line Board (optional).