Toshiba GD-1210 - Manual (Page 154)

7 REGISTERING AND SETTING ITEMS
152 Setting the Initial Transmission Mode
Setting the Initial Transmission Mode
Set the initial settings for the original transmission conditions and transmission type. When you
send an original without changing the original conditions and transmission mode settings, the
original is sent with the initial setting values.
y Resolution: STANDARD, FINE, U-FINE
y MODE (Original mode) TEXT, TEXT/PHOTO, PHOTO
y Exposure: AUTO, MANUAL (adjustable in 11 steps)
y Transmission type: MEMORY TX, DIRECT TX
y TTI recording (Setting is not available in all product markets): ON, OFF
You can send originals appended with a terminal ID preset to your equipment.
You can set this terminal ID in either of the memory TX or direct TX modes.
Entering the terminal ID "2.REGISTERING THE TERMINAL ID"
( P.154 “Registering the Terminal ID”)
y RTI recording: ON, OFF
You can print the received originals appended with time received and a remote Fax ID infor-
mation (if provided).
y ECM (Error Correction Mode): ON, OFF ( P.33 “Setting the Transmission Conditions”)
2
Press the [USER] button to enter the user menu, and then press the
[FAX] button.
1
Press the [USER FUNCTIONS] button
on the control panel.