Upload certificates, Codec c90 administrator guide – TANDBERG Codec C90 D14129.02 User Manual
Page 48
D14129.02—NOVEMBER 2008
48
Codec C90
Administrator Guide
Contents
Introduction
Getting started
About the menus
About the settings
Settings Library
Cameras
Appendices
Contact us
Appendices
The certificates upload procedure
Contact your system administrator to obtain the required files (.PEM format).
Upload certificates
The
Upload certificates
tab lets you upload a CA list
(ROOT certificate) to authenticate TLS connections
on SIP and a HTTPS certificate to enable HTTPS.
The system administrator issues/obtains and installs
unique certificates to each system.
For TLS connections a ROOT Certificate (CA-list) can
be uploaded from the web interface.
When the SIP setting TlsVerify is enabled, only TLS
connections to servers, whom x.509 certificate is
validated against the CA-list, will be allowed.
Go to: Settings > Administrator settings > Advanced
configuration > SIP > Profile > TlsVerify
To install a certificate, you need:
HTTPS certificate ( .PEM format)
•
ROOT certificate ( .PEM format)
•
Private key ( .PEM format)
•
Passphrase (optional)
•
How to upload the certificate
Open a web browser and enter the IP
1.
address to connect to the Codec C90
by HTTP.
Select the
2.
Upload certificates
tab
Click
3.
Browse...
and locate the
certificate files (.PEM)
Type in the
4.
Passphrase
Click the
5.
Upload
button to start the
certificate installation.