Toshiba EVR64-X - Manual (Page 48)

33
4.2 Camera Setup
Select
Camera – Selects the current camera to be edited .
Camera Name – Allows you to specify a name for each camera.
Sensor Connections – Allows you to attach one or more sensor connections to each camera .
You can connect one or more Sensors to the selected camera by checking the box next to the sensor(s).
Connecting a sensor to the camera allows you to activate both Standard Recording and Intensive Recording
Bright – Adjusts the Brightness of the selected camera.
Hue – Adjusts the Hue of the selected camera.
Contrast – Adjusts the Contrast of the selected camera.
Adjust Default – Adjust the color settings for the selected camera back to the System default.
Adjust All Default – Adjusts the color settings for ALL cameras to the System default.
Apply to all channels – Applies current settings to ALL cameras.
Setup Network Device – Sets up a Network Device from a specified address.
Use Network Device – Enables setup and use of a Network Device.
Enable Network Device PTZ – Enables the use of a Network Device PTZ.
1
2
3
4
5
6
Figure 4.2
Camera Setup
2
6 5
1
4 3 8
7
8
9
9
10 10 11
11
10
12
12
7