Toshiba EVR64-X - Manual (Page 32)

17
2.12 Swappable Hard drives
2.12.1 Swapping a Hard Drive
1 Handle Release Button
Press Button to eject the Release Handle.
2 Button Lock
Locks the Handle Release button.
3 Release Handle
Pull to Eject the Hard Drive.
4 Reset Button
Resets the hard drive unit
5 Power Buttons
Turns the power on or off to a hard drive.
6 Temperature Alarm Light
Turns on if a Hard Drive reaches a set
temperature.
1. Press the hard drive power
button to turn off power to the
hard drive you wish to
remove.
2. Turn the button lock to the
open position and push the
hard drive release button.
3. Pull the lever outward
while removing the hard
drive. Reverse steps to
install.
LOCK
OPEN
LOCK
OPEN
LOCK
OPEN
LOCK
OPEN