Toshiba 32SL415U - Manual (Page 57)

Chapter 8: Advanced features
57
Manual Setup
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press p or q to select Wireless Setup. Press .
3無
Press p or q to select Manual Setup. Press .
4無
Press p or q to select Network Name. Press .
The Software Keyboard window appears.
5無
Input the Network Name using the Software
Keyboard ( page 59). To save your settings,
press the
BLUE button.
6無
Press p or q to highlight Authentication. Press t
or u to select Open/Shared, WPA-PSK, or WPA2-
PSK.
7無
Press p or q to highlight Encryption. Press t or
u to select None, WEP, TKIP, or AES.
Note:
• Certain encryption types are only compatible
with specific authentication types.
−When Authentication is Open/Shared, only
WEP or None are compatible.
−When Authentication is WPA-PSK or WPA2-
PSK, only TKIP or AES are compatible.
• When incompatible Authentication/Encryption
pairings are attempted, a warning message will
be displayed, and no connection attempt will
be made until the incompatibility is resolved.
8無
Press p or q to select Security Key. Press . The
Software Keyboard window appears.
9無
Input the Security Key using the Software Keyboard
( page 59). To save your settings, press the
BLUE
button.
Note:
This item is grayed out when Encryption
is None.
10
Select Done. Press .
Note: When Encryption is None, a message
will appear. Press t or u to select Yes. Press
.
Note: Settings are not saved if is pressed
before Done is selected.
Wireless Information
The settings configured in Wireless Setup can be
confirmed.
1無
> Network > Wireless Information > .
2無
When the AP connection succeeds, a Wireless
Information screen will appear.
Note:
Press the RED button to check the
availability of surrounding APs.
Note: This feature is available from the Quick
menu while using Media Player or NET TV
feature.
> Wireless Information > .
Item Description
Status
Connected is displayed when the
TV is connected to the AP.
Disconnected is displayed when the
TV is disconnected from the AP.
Signal
Connection signal strength with the
AP
(STRONG/MEDIUM/WEAK)
Speed The link speed with the AP
Mode Working mode (11a, 11b, 11g, 11n)
Channel The channel in use (1-165)
Network Name SSID set
Authentication
Authentication set
Encryption Encryption set
Security Key Security Key set
AP MAC
Address
The AP’s MAC address is displayed
when the TV is connected to the
AP.
TV MAC
Address
The TV’s MAC address
DHCP
Enabled is displayed when you use
DHCP.
Disabled is displayed when you do
not use DHCP.
IP Address The TV’s IP address
Subnet Mask Value of the Subnet Mask
Default
Gateway
Default GATEWAY’s address
DNS DNS’s address
Note: Even if an AP for IEEE 802.11n is used
when Encryption is set to WEP or TKIP, the
Speed value might be low. We recommend that
the Encryption setting be changed to AES
(Under manual setup).