Topcom BUTLER 4850 - Manual (Page 22)

22 Topcom Butler 4850/Twin/Triple/Quattro
Topcom Butler 4850Twin/Triple/Quattro
d) Recording Outgoing Message
•
Press ‘9’ to select OGM 1 or OGM 2.
• Press ‘5’ to start recording
• A beep will indicate that you can start recording.
• Say your message.
• Press ‘6’ to stop recording.
e) Turning Answering Machine On/Off
•
Press the '9 ' key to switch on the answering machine.
• Press the '8' key to turn off the answering machine.
f) Ending Remote Operation
If you want to end remote operation, press ‘6’.
11.14 Turning answering machine on remotely
If the answering machine is switched off, you can turn it on remotely.
•
Call your machine.
• The machine will pick up automatically after 10 rings and play outgoing message 2.
• Dial the VIP code (default 321) slowly during the message plays.
• Press the '9' key. A long beep will be heard.
• Press ‘6’ to stop operation.
12 Troubleshooting
Problem Possible cause Solution
No Display Batteries not charged Check the position of the
batteries
Recharge the batteries
No dialling tone Telephone cable not
properly connected Check the connection
of the telephone cable
Volume of conversation
partner too low Adjust the volume during the
conversation by pressing the
volume key
Handset ringer volume too low Adjust the ringer volume
Not possible to dial a number Wrong dial mode See “Setting the dialling mode”
to set the correct dial mode
Recording will be automatically interrupted after 2 minutes.