Topcom BUTLER 4850 - Manual (Page 19)

Topcom Butler 4850/Twin/Triple/Quattro 19
Topcom Butler 4850/Twin/Triple/Quattro
ENGLIS
H
11.4 Turning Answering Machine On/Off
If the answering machine is on, the -LED will light up and the machine will automatically pick
up the line after a number of rings (see 'Setting Number of Rings').
•
Press the key to switch on the answering machine. The -LED will be turned on.
• Press the key to switch off the answering machine. The -LED will be turned off.
11.5 Setting number of Rings
The number of rings after which the answering machine will answer calls can be set from
2 – 9 and TS (Toll saver). The standard setting is 3 rings. In Toll saver mode, the machine
will answer after 5 rings if there are no new messages, and after 2 rings if there are new
messages. If there are no new messages and you call your machine to check your messages
remotely (See “11.13 Remote Operation”), you can hang up after the 2nd ring. You do not
need to pay connection fees and you know that you do not have any new messages.
•
Briefly press the key. The display will show the current numbers of rings.
• Press the key for 2 secs to set the number of ringing tones.
• Press the ‘-’ or ‘+’ key to change the current number of rings.
• Confirm the setting by pressing the key.
11.6 Checking number of Rings
• Press the key briefly.
• The display will show the number of rings set.
11.7 Programming the VIP Code
The VIP code is a 3-digit code used to operate the machine remotely (see Remote
Operation). The VIP code is set to '321' by default.
11.7.1 Changing the VIP Code
•
Keep the - key pressed down for 2 secs to change the VIP code.
• The first digit of the VIP code is displayed blinking on the screen.
• Press a few times on ‘-’ or ‘+’ keys to set the first number of the VIP code.
• Press the key to confirm the first number. The display will show the current set 2nd
digit of the VIP code.
Even if the answering machine is off, the machine will automatically pick up
after 10 rings in order to enable remote activation (see 9.15 Remote
operation).
• If you do not press any keys for 3 seconds, the machine will revert
back to the answering machine menu, without changing the settings.
• If there is a loss of power in the base, the number of rings will revert to
3.
If there is a loss of power to the base, the VIP code will revert to '321'.