Front panel, 2 – parts of the us-122mkii – Tascam US-122MKII User Manual

Page 10

TASCAM US-122MKII

Front panel

MIC IN (L, R) jacks

(XLR balanced)

These are analog mic input jacks. The wiring
is as follows: pin 1 = ground, pin 2 = hot, pin
3 = cold.

LINE IN L jack

(TRS 1/4” phone jack)

These are balanced line input jacks.

PHONES jack

(stereo 1/4” phone) This

is a headphone output jack.

CAUTION

Use the PHONES/LINE OUT knob to
minimize the volume before connecting
headphones. Failure to do so could cause
a sudden burst of loud noise, which might
result in hearing damage, for example.

NOTE

The headphone output level and the line
output level are both adjusted using the
combined PHONES/LINE OUT level knob.

LINE IN R/GUITAR IN jack

(TRS 1/4”

phone jacks) These are balanced line input
jacks. This also accommodates guitar input.
If the top panel

MIC/LINE

GUITAR

select

switch is in the

GUITAR

position, this

operates as an unbalanced input jack for
guitar. If the

MIC/LINE-GUITAR

select switch

is in the

MIC/LINE

position, this operates as

a balanced input jack. (Sleeve = ground, tip
= hot, ring = cold)

2 – Parts of the US-122MKII