Clearing a staple jam, Staple jam in the finisher, P.42 “clearing a staple jam – Toshiba e-studio 5520C User Manual
Page 44
1 TROUBLESHOOTING FOR THE HARDWARE
42 Clearing a Staple Jam
Clearing a Staple Jam
When a staple jam has occurred in the stapler of the Finisher or Saddle Stitch unit, clear the jam following the procedure
below.
P.42 “Staple jam in the Finisher”
P.43 “Staple jam in the Saddle Stitch unit”
Staple jam in the Finisher
1
Open the front cover of the Finisher.
2
Remove the staple cartridge.
3
Lower the guide while holding the knob.
A: Stapling area
Do not touch the stapling area.
The actual needle point could cause you personal injury
4
Remove the jammed staples.
A
This manual is related to the following products: