Tiger JD 62-6430 - Manual (Page 27)

Assembly Section 2-7
ASSEMBLY
WELDING MAIN FRAME
Make sure you use the appropriate safety equipment. Weld the Tangs onto your
existing Main Frame as shown below. Next, weld on the Boss’ making sure the
orientation of the cross holes for the bolts are correct.
ITEM PART NO. QTY DESCRIPTION
1 06300059 * MAIN FRAME
2 06401066 2 TANG,LEFT,MNFRM
3 06401067 1 TANG,RIGHT,MNFRM
4 06470013 1 BOSS,2.50OD x 1.56ID x 1.00
5 23387A 2 BOSS,2.50OD x 1.53ID x 1.25