Tiger JD 62-6430 - Manual (Page 24)

Assembly Section 2-4
ASSEMBLY
HYDRAULIC MULTIPLIER VALVE MOUNTING
Align the mounting bracket to the existing holes on rear of the tractor by the PTO.
Secure the bracket to the tractor with the existing hardware. Then align the holes and
secure the valve to the mounting bracket as shown in the parts section. Install the
electrial control wires from the controller that are routed through the rear window of the
cab. See previous page for wire designation. Install the hydraulic lines from the Multiplier
Valve to the tractor remotes.
FOUR FUNCTION
HYDRAULIC
MULTIPLIER VALVE
MOUNTING BRACKET
RETURN FROM
REMOTE
PRESSURE FROM
REMOTE
EXISTING HARDWARE