Tekkeon MP1280 - Manual (Page 9)

USER GUIDE 7
Removing Your iPhone 4 from the Battery Case
1. Gently pull the battery module from the
control module to separate the two pieces.
2. Slide your iPhone 4 away from the 30-pin
connector in the control module.
3. To store myPower for iPhone 4, slide the
battery module onto the control module until
it snaps into place or store the two pieces
separately.
Viewing the Battery Capacity
When your iPhone 4 is in the battery case, the
Capacity Indicator on the end of myPower for
iPhone 4 will indicate the remaining battery
capacity as follows:
Blue 20%-100%
Red 1%-20%
When the Capacity Indicator turns to red,
recharge the battery.
Charging myPower for iPhone 4
An empty myPower for iPhone 4 will charge
in about 3 hours using an iPhone 4-compliant
power adapter. Both empty batteries
(your iPhone 4 and myPower for iPhone 4)
can be charged in about 6 hours.