Tekkeon MP1280 User Manual
Page 8
6
MP1280
3. Slide the battery module down over your
iPhone 4 until it snaps into place.
4. When you’re ready to use the battery,
slide the On/Off switch to the On position
(to the right). The battery icon on your
iPhone 4 will change to
to indicate
your iPhone 4 is being externally powered.
5. Use your iPhone 4 as you would
normally. The iPhone 4 battery
will not be used while
iPhone 4 is in the case
until myPower for
iPhone 4 is empty, or
you slide the power
switch to off.
Notes: The On/Off switch functions only when
your iPhone 4 is in the battery case. When your
iPhone 4 is not in the battery case, power is
disabled so the battery will not slowly drain.
To maximize your myPower for iPhone 4 battery
power, turn off myPower for iPhone 4 if your
iPhone 4 will be in standby mode for an
extended period (such as overnight).