Toshiba IK-TF5 - Manual (Page 27)

27
( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET)
The trigger input to the RGB terminal develops 1 field images.
(3. 1) Pulse Width Trigger SYNC-NON RESET Picture Output Timing
(At Time of One-shot or Continuous External VD/Continuous External HD Input)
*1: Externally input signal
*2: Exposure time = Trigger pulse width + 6 ms
(Valid trigger pulse width is 2 ms or greater for external trigger shutter operation.)
*3: Video is output at the falling edge of the internal VD following completion of the exposure period.
The video and the VIDEO INDEX have a paired relationship.
Note:
When the next trigger is input before completion of the output of the video corresponding to the trig-
ger, there will be an effect on the video.
About 1
µ
s
Exposure period* 2
Video output
525H (Partial scanning OFF)
175H (Partial scanning ON) The internal VD falling edge is within the exposure
period and thus video is not output. *
3
VIDEO INDEX
External VD IN* 1
External HD IN* 1
(Internal VD)
About 7
µ
s
About 1H
Negative polarity mode
Positive polarity mode
Exposure period* 2
Trigger* 1