2 gain, 3 shading correction – Toshiba IK-TF5 User Manual
Page 10
10
2
MANU (Manual white balance)
• Set the MODE to MANUAL on the WHT BAL menu.
(Refer to the item "7.2 (3) WHT BAL (white balance)".)
• Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the
menu, confirming with a monitor or a waveform monitor.
(Refer to the item "7.2 (3) (3.2) Changing each setting in MANU mode".)
Meaning
Automatic white balance adjustment cannot be performed because the
shutter speed mode is EXT TRIG mode.
Automatic white balance adjustment cannot be performed for other
reasons. Such as no white area is included in an object, etc.
Result displayed
AWB NG
NOT AVAILABLE
AWB NG
6. 2 Gain
When the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level.
For the gain adjustment of the unit, MANUAL (Manual) and OFF (0 dB) modes are provided. Select the mode
on the GAIN menu. (Refer to the item "7.2 (2) GAIN (Video gain)".)
1
MANU (Manual gain)
Gain adjustment is performed on the GAIN menu. The adjustment range is from -3dB to 18dB in 1dB steps.
(Refer to the item "7.2 (2) (2.1) (a) Changing the gain in MANUAL mode".)
2
OFF
Gain is fixed at 0 dB.
6. 3 Shading Correction
Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of
the screen. In this case, the shading correction can decrease the color shading. For the shading correction of
the unit, MANU (Manual shading correction) and OFF (no shading correction) modes are provided. Select the
mode on the PROCESS menu. (Refer to the item "7.2 (4) (4.5) Changing shading correction mode".)
1
MANU (Manual Shading)
Perform the correction amount setting on the PROCESS menu, confirming with a monitor or a waveform
monitor. (Refer to the "7.2 (4) (4.6) Changing the manual shading correction setting".)
2
OFF
The status is no shading correction.
* The shading correction is effective when the lens iris or zoom ratio is fixed. Use the unit with SHAD-
ING OFF for variable lens conditions.