Toshiba MW24FP1 - Manual (Page 36)

36
Playback (VCR)
To start the playback, press PLAY.
The playback will be repeated endlessly.
Press MENU repeatedly until the menu screen
is cleared.
If you press DISPLAY, “ ” will
appear on the screen 22 .
PLAY
COUNTER RESET
Convenient function
To cancel repeat mode:
In step 3 above, press or to select “OFF” position.
Press MENU repeatedly until the menu screen is cleared. The
repeat function is canceled automatically when the unit is
switched off.
Press or to select “AUTO REPEAT”. 2
Press or to select “ON” or “OFF”.
If “ON” is selected, the playback will
be repeated endlessly.
3
4
5
Repeat playback
The entire video tape will be played until its end. The tape
will automatically rewind to the beginning and the playback
will be repeated.
Using the real time tape counter
ENTER
ENTER
SETUP
MENU
PLAY
Press DISPLAY. 1
Press COUNTER RESET to set the counter to
“00:00:00”. 2
Begin Playback or Recording to start the tape,
the counter will display the elapsed time. 3
When you wish to make the counter disappear,
press DISPLAY once again. 4
The on-screen real time tape counter shows the tape
running time in hours, minutes and seconds. You can
easily determine how long the tape has been running or
how much time is left on the tape.
8:40AM THU
00:00:00 SP
CH 012
TV/VCR
00:30:50 SP
8:40AM THU
TV/VCR
CH 012
DISPLAY
ANGLE
COUNTER
RESET
PLAY
DISPLAY
REC
REC
DISPLAY
MENU
TIMER REC SET
AUTO REPEAT
/ / / / MENU
OFF
TIMER REC SET
AUTO REPEAT
/ / / / MENU
ON
Press MENU, then press or to select
option.
1
SETUP
MENU
ENTER
TIMER REC SET
AUTO REPEAT
/ / / / MENU
OFF
5L00201C [E]p33-37 20/4/04, 16:07 36