P700wls ioprox receiver, S1 receiver configuration – Tyco ioProx Receiver P700WLS User Manual
Page 9
Installation Manual
P700WLS ioProx Receiver
DN1628-0806
5
S1 Receiver Configuration
Placing the DIP switches in the ON or OFF position determines which specific button on the
multi-button transmitter will activate the receiver and Wiegand format to be transmitted to the control
panel. (See Table 1 below)
Data Path Selector Settings:
Kantech XSF (default): Position 4 (ON).
26-bit Wiegand: Position 4 (OFF).
The selectors for position 1 and 2 select which of the four buttons will
activate the receiver.
Format
Button
1
2
3
4
XSF
Button 1
OFF
OFF
ON
ON
Button
2
ON
OFF
ON
ON
Button
3
OFF
ON
ON
ON
Button
4 ON ON ON ON
26W
Button 1
OFF
OFF
ON
OFF
Button
2
ON
OFF
ON
OFF
Button
3
OFF
ON
ON
OFF
Button
4 ON ON ON OFF
Table 1 Data Path Selector Settings
1 2 3 4
S1
1 2 3 4
S1
Button 1
Button 3
Button 2
Button 4
1 2 3 4
S1
1 2 3 4
S1