Tannoy REVEAL TS12 User Manual
Page 5
Reveal 6
Passive nearfield reference monitor
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 165mm (6
1
/
2
”) woofer, multi fibre paper pulp cone
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBand™
HF extended to 51kHz corrects phase response
The Reveal 6 combines all the heritage and purity of the original Reveal series
with the very latest in technology. The result is a no-nonsense nearfield
reference monitor with deep, punchy bass, clean and open mid-range
and unrivalled vocal intelligibility. Combine the Reveal 6 with your
preferred power amplifier and hear just how good a passive reference
monitor can sound.
Reveal 6
Frequency response
(1)
63Hz-51kHZ
Recommended Amplifier Power
50 to 100W @ 8W
Power Handling Average RMS
50W
Normal Impedance
6
Sensitivity
(3)
90dB for 1W at 1m
Distortion <0.6%
Crossover Frequency
2.9kHz
Dispersion (@-6dB)
90 degrees
DRIVE UNITS
Drive Units - LF/MID
165mm (6
1
/
2
”) multi fibre
paper pulp cone
WideBand™ HF
25mm (1”) titanium dome
neodymium magnet system
Cabinet
Type
Optimised bass-reflex loaded
Construction
MDF cabinet and front baffle.
Tongue and groove front and back
Finish
Grey cabinet
Maroon painted baffle