3 - menu functions, 18initializing settings – Tascam DA-45HR User Manual

Page 21

3 - Menu functions

TASCAM DA-45HR

3.17Parameter save

Saves the following parameters so that they become
the default parameters when the tape deck is next
powered up:

• Single Play

• Skip Play

• Repeat Mode

When this menu item is first displayed, the right side
of the display shows:

----

. To save the current

settings, turn the

DATA

dial

[20]

, so that the display

shows

Save

, and press

ENTER [27]

3.18Initializing settings

Resets all menu values to their default settings except
for the head time, (see 3.1, "Drum time (head
time)"), which cannot be reset.

To reset the values to default, turn the

DATA

dial

[20]

so that the display shows

Init.

and press

ENTER [27]

If the screen shows

Init.

in error, turn the

DATA

dial again so that the display shows

----

3.19Viewing points at which block

errors have occurred

This display is shown if the

MENU

key is pressed

once more following the reset screen above.

This displays up to five points in ABS time format
where more than one block error has occurred within
a frame. Turn the

DATA

dial to view the five points at

which these errors have occurred. Turning the dial
clockwise after error #5 will show the total number
of such errors (up to a total of 99 errors).

While a block error time is shown on the display,
pressing the

LOC 2

key will write the error location

to the second location memory and start locating the
tape to that point.

While any of the locations or the total number of the
tape errors menu is shown on the display, the infor-
mation can be cleared by pressing the

MARGIN

RESET

key. Ejecting the tape will also clear this

data.

ABS

0 0

2 3

0 8