Telos Zephyr Xport - Manual (Page 21)

ZEPHYR XPORT
USER’S GUIDE
CHAPTER 2 - GETTING STARTED
11
3. Press the button once. Note that the menu item moves to the top of the
screen and information about Country is displayed.
4. Press the < 6> button repeatedly to view the possible settings for this menu item (e.
g. Argentina to Yemen, or something in between).
w
IMPORTANT TIP! You can press the
saving the changes you have made.
5. Press the button to confirm your selection. Or, press
change.
Example 2: Entering a numeric entry (i.e. entering a prefix):
1. From the default menu, press the You should see ???
2. Verify that the menu item Prefix is highlighted (i.e. is shown with white text on a
black background). If not, use the < 5> button to highlight this menu selection.
3. Press the button once. Note that the menu item moves to the top of the
screen and information about Prefix is displayed. ???
4. Press the < 5> button repeatedly to erase any existing information.
5. Type in the new Prefix number using the Zephyr Xport’s keypad.
6. To place a 1 second pause in a dialing string, press <*> or <#> twice to enter a ","
character.
w
IMPORTANT TIP! You can press the
saving the changes you have made.
IF THIS UNIT HAS ALREADY BEEN CONFIGURED, YOU SHOULD PRESS
7. Press to confirm your entry. Or, press
abort the entry process.
More on the Numeric Keypad – Entering Alphabetic Characters
Some menu items allow entry of characters from the keypad. A given keypad button
corresponds to the number printed on it. It can also be used for text entry of the
letters beside it. Additional characters are available on the <*> key (i.e. * ( ) [ ] < >
) and the <#> key (i.e. # . , ; : ! ? ) and underscore is available on the
<1> key.
To enter text characters, press the key with the appropriate letter printed near it.
Keep tapping it to cycle through the possible choices. For example, tapping the
2 -
key in a text field will first enter A . Repeated taps will change that to a B , then C ,
then the lower- case letters, then the number 2 . Enter a space by pressing * eight
times. Punctuation characters appear on the * and # keys.