Customizing the function settings (continued), Setting details, Dynamic range control – Toshiba SD-4205 User Manual
Page 54: Karaoke vocal, Cd attenuation
58
Function setup
All speakers should
be located within a
circle with a radius
of
Df
.
Ideal location of a
center speaker
Ideal location of a
surround speaker
SR
SL
FL
FR
SW
(A)
Dc
Df
Ds
(B)
Adjusting the delay time:
When enjoying 5.1ch surround playback, it is ideal
to choose a listening position that is the same
distance from each speaker. By adjusting the
delay time of the center/surround speakers, you
can virtually create an ideal listening environment
(as if the center/surround speakers were at their
ideal locations respectively as below.)
Center Channel Delay
0msec: When
Df
equals
Dc
.
1msec: When
(A)
is approx. 34 cm (13 inch)
2msec: When
(A)
is approx. 68 cm (27 inch)
3msec: When
(A)
is approx. 102 cm (40 inch) . . .
*
(A)
=
Df
–
Dc
Get your optimum value (0, 1, 2 . . . 5)
dividing
(A)
by 34.
Surround Channel Delay
0msec: When
Df
equals
Ds
.
1msec: When
(B)
is approx. 34 cm (13 inch)
2msec: When
(B)
is approx. 68 cm (27 inch)
3msec: When
(B)
is approx. 102 cm (40 inch) . . .
*
(B)
=
Df
–
Ds
Get your optimum value (0, 1, 2 . . . 15)
dividing
(B)
by 34.
3) Select “Test Tone” and press the ENTER
button.
The DVD video player outputs a test signal to
each speaker when it is in stop mode. When
playing a DVD video disc, it substitutes the
current sound for the test signal.
Move the cursor control ( / ) to select the
receiving speakers, and adjust the volume of
each speaker at the same level by moving the
cursor control ( / ).
If all the volume levels cannot be equalized,
adjust them on the amplifier.
Note
Depending on the disc, 6 channel sounds may not be
output via the 5.1 CH SURROUND AUDIO OUT jacks.
Dynamic Range Control
Off: Full dynamic range is maintained.
On: Dynamic range is reduced.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD video disc.
Karaoke Vocal
Off: The primary vocal is not output.
On: The primary vocal is output when it is recorded
on the disc.
Notes
• The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
• When playing KARAOKE, connect appropriate audio
equipment such as an amplifier to the DVD video
player.
CD Attenuation
HDCD enhances the output sound level of audio CD
by approximately 6 dB. As such, distortion may occur
in some connected products that are unable to
compensate for a wide range of input signal levels.
(e.g. TV, stereo receivers)
Off: For normal use.
On: Select when an audio CD sound is distorted.
Sound volume of an audio CD is lessened.
DVD
DVD
CD
Customizing the Function Settings (continued)
Setting details
(Continued)