Toshiba SD-4205 - Manual (Page 39)

42
Advanced playback
Selecting a Language
You can select a preferred language and sound recording system from those
included on the DVD video disc.
Press AUDIO during playback.
The current audio setting is
displayed for about 3 seconds.
The abbreviation of the language appears instead
of the language name. Refer to the list of
languages and their abbreviations.
64
Press AUDIO or move the cursor
control ( ) while the audio setting is
displayed on the TV screen.
Each time you press the AUDIO
button or move the cursor control
( ), the audio settings included on
the DVD video disc change.
e.g.
: Cycles backwards
If you move the cursor control
( / ), you can select output sound
format.
57
To turn off the audio setting display, press the
CLEAR button.
1
2
Selecting sound channels of VIDEO CDs
You can switch left and right channels by pressing the
AUDIO button repeatedly during playback.
Notes
• When you turn on the DVD video player or replace a disc,
player returns to the initial default setting 59 .
If you select a sound track which is not included on the disc,
the DVD video player plays a prior sound track programmed
on the disc.
• Some discs allow you to change audio selections only via
the disc menu. If this is the case, press the MENU button
and choose the appropriate language from the selections on
the disc menu.
Good morning! ¡Buenos días! Bonjour!
CLEAR
1, 2
2
AUDIO
AUDIO
ENTER
ENG CH PCM 2 Audio
FRE Audio
SPA CH PCM 2 Audio
:
:
:
CH D 2
AUDIO
ENG CH PCM 2 Audio :
Audio Out Select Bitstream :
Language
Recording system
Audio channel
Output sound format 54 57
Selecting a playback audio setting
DVD