30601-16 2lts semiflush assembling instruction.pdf – Triarch Semi Flush 31601-16 2lts User Manual

Page 2

Text mode
Original mode

30601-16 2lts Semi Flush Assembling Instruction

(

for SEMI FLUSH)

1. Unpack the carton and place the fixture on a flat surface. Attention: All necessary

hardware and loose components have been verified for this fixture and are packed inside.
Do not discard inner packing until you have inspected it thoroughly.

2. Put the CENTER COLUMN (F) onto the hook of the CANOPY ASSEMBLY(C).

3. Place GLASS (G) Into the GLASS FRAME (H).

4. With the help of another person to hang the bottom hook of HANGER (E) to the GLASS

FRAME (H) then hang onto the SIDE HOOK (D) of the CANOPY ASSEMBLY (C).

5. Follow the wattage label on the fixture and install proper bulbs (not provided) onto the

sockets.

For mounting and wiring step please follow the mounting instruction sheet enclosed.

LOOP (A)

NIPPLE (B)

CANOPY ASSEMBLY(C)

HANGER (E)

CENTER COLUMN (F)

GLASS (G)

GLASS FRAME (H)

SIDE HOOK (D)