Telular CDMA 2000 1X - Manual (Page 7)

Connect the SX4P to AC Power
1. Attach the barrel connector of the power supply to the AC power input on the rear panel of
the SX4P.
2. Connect the AC power cord to the power supply.
3. Move the AC/Battery switch to the AC position.
4. Plug the AC power cord into the wall socket. The SX4P will power up automatically.
5. Check the cellular strength and move the unit as needed to get the best signal - see the
Service Indication section of this manual.
Phonecell ® SX4P 1x 3 User Manual
Power supply
Wall socket
AC power cord
AC power input
AC/battery switch
Figure 9 - Connecting the SX4P to AC Power.