Toshiba IK-HR1S - Manual (Page 8)

8
IK-HR1S
DC IN 12V
Lens (option) 75 ohms coaxial
cable (option) HD-SDI
input HD-SDI
(BNC connector)
HD- capable
monitor (option)
DC power supply
(option)
AC adapter (AC-Y415A)
Less than 11 mm [0.433”]
4 1 Standard Connection
4 CONNECTION
䊶 When connecting the camera cables, be sure to turn off the CMOS color camera and
any other equipment connected to it.
䊶 For DC supply connecting to DC IN 12V terminal, when not using AC adapter:
AC-Y415A (not supplied), use UL listed and/or CSA approved ungrounded type AC
adapter with the specifications described below. Please purchase connectors
separately.
䊶
Please use a good quality, low resistance cable for the HD-SDI terminal. 䊶
Power supply voltage 䋺 12V DC 㫧10%
Current rating 䋺 More than 830mA
Ripple voltage 䋺 Less than 50mV (p-p)
Connector 䋺 HR10A-7P-4S by HIROSE electronics Co. Ltd
Pins 1, 2 䋺 12V
Pins 3, 4 䋺 GND
4 2 Cautions on Connection
We suggest using a C mount mega pixel lens. When using other lenses, the best
performance of this camera may not be obtained.
(For example, low resolution may occur, focus may be lost through the range of a
zoom lens, and flare, ghosting may occur.)
Furthermore, in order to avoid damaging the mounting portion of the camera head,
use a lens which has projection dimension from the mounting base of less than
0.433" (11mm.)